PRODUCT GROUPS
NEW PRODUCTS
-
DetailsFilaticum Semiflex
16 000 Ft – 53 280 Ft 12 598 Ft + VAT Add to cartFilaticum Semiflex is a soft, flexible filament. Objects printed from this filament will not break or deform when they are moderately bent, and after that they will regain their original shape.
The filament has a Shore hardness value of 95, for comparison, it is equal to the hardness of a shopping trolley wheel, for example.
Filaticum Semiflex filament is already a flexible on the spool, easy to wind without breaking or stretching. It retains its softness after printing also, making it suitable for producing various types of catches, dampers and objects where it is important not to scratch other surfaces.
Thanks to its PLA base raw material, it is much easier to print than most other flexible filaments and does not require a special printer either.
Recommended printing settings: lower speed (50 mm/s) or higher temperature (215, max. 220 °C)
-
DetailsFilaticum PLA Litho
8 500 Ft 6 693 Ft + VAT Add to cartPLA filament designed for printing lithophanes, for beginners and professionals.
The uniquely developed off-white colour gives a beautifully bright appearance on thin surfaces and a darker, contrasting appearance on thicker surfaces. Printed objects will look like real photographs. Thanks to the additive used to achieve the special optical effect, the printed layers are also less visible, they almost disappear.
-
DetailsFilaticum Fuzzy
9 500 Ft 7 480 Ft + VAT Add to cartFilaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.
-
DetailsFilaticum PLA High Impact
16 000 Ft – 53 280 Ft 16 535 Ft + VAT Add to cartThanks to its unique recipe, Filaticum PLA High Impact filament provides the printed object with high impact resistance, comparable or even higher than PETG provides. The flexibility of the filament is similar to that of polypropylene, but printing with it is as simple as with any PLA filament. The impact resistance of the filament depends largely on the printing parameters, it is preferable to print at higher temperatures – up to 225 0C.
-
DetailsFilaticum PLA Advanced PRO
11 800 Ft – 29 500 Ft 8 898 Ft + VAT Add to cartThis filament is an improved version of our Filaticum PLA Advanced product, and it provides higher quality in terms of mechanical properties. Its PLA raw material is produced specially for 3D printing filaments, which we made even more unique with special additives; thus, it can be used as an alternative to PETG and ABS. What distinguishes from PLA Advanced is that objects printed from PRO filament are much more flexible and impact resistant.
Filaticum PLA Advanced PRO is a really user-friendly, easy-to-print filament. It adheres easily to the bed, its layer adhesion is also excellent, thus providing an even surface and more precise printing result. Higher printing temperature (225C0) is required to achieve better mechanical properties.
-
DetailsFilaticum Electrical: Antistatic
35 000 Ft – 124 580 Ft 27 559 Ft + VAT Add to cartFilaticum Electrical products are used mainly in the electronics and automotive industry where electrostatic charging of the printed object can damage the product. Objects printed with Filaticum CONDUCTIVE, ESD or ANTISTATIC do not charge electrostatically due to the special carbon and chemical additives. Additionally, the dust and fine powder does not stick on the surface.
To decide for which application which filament suits the best, can be determined mainly experimentally. It depends on the electrical and mechanical requirements of the objects, and the 3D printing parameters. Filaticum Antistatic has the best mechanical properties, similar to standard PLA. Filaticum Conductive is the most rigid in this line, because of the used carbon powder and fiber, required for conductivity. Filaticum ESD is somewhere in the middle range.
Filaticum Antistatic: its main feature is the immediate and permanent antistatic effect. Its important characteristic also that it does not absorb the moisture content of the air. It keeps most physical properties of PLA, and it has increased impact strength compared to PLA. It can be produced in any color. No sloughing, off gassing or blooming.
For proper printing results use PLA printing settings: we recommend 210-230 °C printing temperature, at least 0.2 mm nozzle, and printing speed no higher than 90 mm / sec. Bed temperature 40-60 °C, usually any type of surface can be used.
-
DetailsFilaticum Electrical: Conductive
35 000 Ft – 116 550 Ft 27 559 Ft + VAT Add to cartFilaticum Electrical products are used mainly in the electronics and automotive industry where electrostatic charging of the printed object can damage the product. Objects printed with Filaticum CONDUCTIVE, ESD or ANTISTATIC do not charge electrostatically due to the special carbon and chemical additives. Additionally, the dust and fine powder does not stick on the surface.
To decide for which application which filament suits the best, can be determined mainly experimentally. It depends on the electrical and mechanical requirements of the objects, and the 3D printing parameters. Filaticum Antistatic has the best mechanical properties, similar to standard PLA. Filaticum Conductive is the most rigid in this line, because of the used carbon powder and fiber, required for conductivity. Filaticum ESD is somewhere in the middle range.
Filaticum Conductive provides surface resistance at megaohm order of magnitude, but this highly depends on the size and shape of the printed object. As a rule of thumb, if the printing temperature is higher, the surface resistivity is lower.
For proper printing results we recommend 210-240 °C printing temperature, at least 0.4 mm nozzle, and printing speed no higher than 60 mm / sec. Bed temperature 40-60 °C, usually any type of bed surface can be used.
-
DetailsFilaticum Foam
21 000 Ft – 63 000 Ft 16 535 Ft + VAT Add to cartObjects printed with Filaticum Foam have got a foamy, spongy texture. The hard 3D printed foam has open cell structure. Due to the foamed structure, the layers are barely visible, and it has a nice, smooth surface. However, it can be easily sanded, cut, painted and shaped as needed. The beige color variant looks natural and the black one has a particularly shiny matte finish.
The structure of the foam, the quality and structure of the surface can be widely modified by changing the printing settings.
Objects with the required density and foam structure can be printed by setting the parameters accordingly.
- temperature: 190-250 0C
- filament flow: 40-120 %
- speed: 20-100 mm/s
- nozzle size: 0.2-1 mm
At higher temperatures, lower flow and speed, and with a large nozzle the lightest foam can be produced. Using the standard PLA settings, the result is a tough foam and impact resistance. The density of an object made of Filaticum Foam is 50-60% of that of an object printed with standard PLA. Depending on the settings, it can be varied from 0.6 g / cm3 up to 1.2 g / cm3.
Filaticum Foam is suitable for applications where light 3D printed objects are needed, e.g. automotive industry, modelling or founding. Its foamed structure can be exploited in printing art objects, sculptures, and biologically active substrates. It can be applied as support material also.
FILATICUM BLOG
