PLA
Showing 1–16 of 24 results
-
DetailsFilaticum PLA Litho
8 990 Ft – 22 390 Ft 7 079 Ft + VAT Add to cartPLA filament designed for printing lithophanes, for beginners and professionals.
The uniquely developed off-white colour gives a beautifully bright appearance on thin surfaces and a darker, contrasting appearance on thicker surfaces. Printed objects will look like real photographs. Thanks to the additive used to achieve the special optical effect, the printed layers are also less visible, they almost disappear.
-
AKCIÓ
DetailsFilaticum PLA
6 300 Ft – 22 390 Ft 7 079 Ft + VAT Add to cartThanks to special additives and pigments, Filaticumt PLA is characterized by easy printability and saturated colors. Even when you print in one layer, you will get the same color you see on the spool. Printable in a wide temperature and printing speed range. The Filaticum PLA can be used without heated bed, and even with an open 3D printer you will get good printing quality.
-
AKCIÓ
DetailsFilaticum PLA Advanced
8 250 Ft – 29 390 Ft 9 283 Ft + VAT Add to cartThe PLA raw material of PLA Advanced was developed especially for manufacturing 3D printing filaments, which has to meet higher printing needs. The objects printed with this filament are stronger and more durable.
Filaticum PLA Advanced also has a higher heat resistance, up to 85 0C. With this value, it also competes against PETG and ABS filaments. This filament is less brittle, and with excellent layer adhesion we can achieve an exceptionally even surface and more precise printing. The surface of printed object can be shiny at elevated printing temperature and matt at lower temperature, but this depends on the printer also.
-
DetailsFilaticum PLA High Speed
9 990 Ft – 24 890 Ft 5 504 Ft + VAT Add to cartFilaticum High Speed filament has been developed for fast, at the same time accurate 3D printing. It produces high quality, precise prints with a printing speed of 300 mm/s. Depending on the object and the printing settings, up to 600 mm/s printing speed can be achieved with this filament. Because of the special additives, the filament has a lower viscosity, providing excellent material spread and adhesion between layers. Since the filament can be dispensed evenly at higher speeds, there is no clogging or under-extrusion during printing.
-
DetailsFilaticum Engineering
22 290 Ft – 74 290 Ft 12 283 Ft + VAT Add to cartThis PLA-based filament offers enhanced possibilities for industrial applications. The thermal stability of objects printed with Filaticum Engineering is extremely high, they could bear up to 120 °C heat, in most of the cases without any heat treatment after printing.
Filaticum Engineering is also much more resistant to other external impacts than standard PLA materials: it has a high tensile and compressive strength and extremely high stiffness, making it an excellent material for objects that are exposed to typical influences in industrial environments.
-
DetailsFilaticum PLA Budget
6 390 Ft 5 032 Ft + VAT Add to cartFilaticum PLA Budget filament, just like other Filaticum PLA products, provide excellent printing results. Their shrinkage is minimal, you can print them even on an unheated bed. They are available in black, white, blue, red and silver-gray colors, on 750-gram rolls at a reasonable price.
-
DetailsFilaticum PLA High Impact
16 990 Ft – 56 590 Ft 13 378 Ft + VAT Add to cartThanks to its unique recipe, Filaticum PLA High Impact filament provides the printed object with high impact resistance, comparable or even higher than PETG provides. The flexibility of the filament is similar to that of polypropylene, but printing with it is as simple as with any PLA filament. The impact resistance of the filament depends largely on the printing parameters, it is preferable to print at higher temperatures – up to 225 0C.
-
DetailsFilaticum Foam (lightweight)
22 290 Ft – 66 890 Ft 17 551 Ft + VAT Add to cartObjects printed with Filaticum Foam (lightweight) have got a foamy, spongy texture. The hard 3D printed foam has open cell structure. Due to the foamed structure, the layers are barely visible, and it has a rogh, sandblasted-like surface, . However, it can be easily sanded, cut, painted and shaped as needed. The beige color variant looks natural and the black one has a particularly matte finish.
The structure of the foam, the quality and structure of the surface can be widely modified by changing the printing settings.
Objects with the required density and foam structure can be printed by setting the parameters accordingly.
- temperature: 190-250 0C
- filament flow: 70-120 %
- nozzle size: 0.2-1 mm
At higher temperatures, lower flow and speed, and with a large nozzle the lightest foam can be produced. Using the standard PLA settings, the result is a tough foam and impact resistance. The density of an object made of Filaticum Foam is 50-60% of that of an object printed with standard PLA. Depending on the settings, it can be varied from 0.6 g / cm3 up to 1.2 g / cm3.
Filaticum Foam is suitable for applications where light 3D printed objects are needed, e.g. automotive industry, modelling or founding. Its foamed structure can be exploited in printing art objects, sculptures, and biologically active substrates. It can be applied as support material also.
-
DetailsFilaticum Semiflex
16 990 Ft – 56 590 Ft 13 378 Ft + VAT Add to cartFilaticum Semiflex is a soft, flexible filament. Objects printed from this filament will not break or deform when they are moderately bent, and after that they will regain their original shape.
The filament has a Shore hardness value of 95, for comparison, it is equal to the hardness of a shopping trolley wheel, for example.
Filaticum Semiflex filament is already a flexible on the spool, easy to wind without breaking or stretching. It retains its softness after printing also, making it suitable for producing various types of catches, dampers and objects where it is important not to scratch other surfaces.
Thanks to its PLA base raw material, it is much easier to print than most other flexible filaments and does not require a special printer either.
Recommended printing settings: lower speed (50 mm/s) or higher temperature (215, max. 220 °C)
-
DetailsFilaticum Electrical: Antistatic
36 990 Ft – 123 290 Ft 29 126 Ft + VAT Add to cartFilaticum Electrical products are used mainly in the electronics and automotive industry where electrostatic charging of the printed object can damage the product. Objects printed with Filaticum CONDUCTIVE, ESD or ANTISTATIC do not charge electrostatically due to the special carbon and chemical additives. Additionally, the dust and fine powder does not stick on the surface.
To decide for which application which filament suits the best, can be determined mainly experimentally. It depends on the electrical and mechanical requirements of the objects, and the 3D printing parameters. Filaticum Antistatic has the best mechanical properties, similar to standard PLA. Filaticum Conductive is the most rigid in this line, because of the used carbon powder and fiber, required for conductivity. Filaticum ESD is somewhere in the middle range.
Filaticum Antistatic: its main feature is the immediate and permanent antistatic effect. Its important characteristic also that it does not absorb the moisture content of the air. It keeps most physical properties of PLA, and it has increased impact strength compared to PLA. It can be produced in any color. No sloughing, off gassing or blooming.
For proper printing results use PLA printing settings: we recommend 210-230 °C printing temperature, at least 0.2 mm nozzle, and printing speed no higher than 90 mm / sec. Bed temperature 40-60 °C, usually any type of surface can be used.
-
DetailsFilaticum PLA Advanced PRO
12 490 Ft – 31 290 Ft 9 835 Ft + VAT Add to cartThis filament is an improved version of our Filaticum PLA Advanced product, and it provides higher quality in terms of mechanical properties. Its PLA raw material is produced specially for 3D printing filaments, which we made even more unique with special additives; thus, it can be used as an alternative to PETG and ABS. What distinguishes from PLA Advanced is that objects printed from PRO filament are much more flexible and impact resistant.
Filaticum PLA Advanced PRO is a really user-friendly, easy-to-print filament. It adheres easily to the bed, its layer adhesion is also excellent, thus providing an even surface and more precise printing result. Higher printing temperature (225C0) is required to achieve better mechanical properties.
-
DetailsFilaticum Electrical: ESD
36 990 Ft – 123 290 Ft 29 126 Ft + VAT Add to cartFilaticum Electrical products are used mainly in the electronics and automotive industry where electrostatic charging of the printed object can damage the product. Objects printed with Filaticum CONDUCTIVE, ESD or ANTISTATIC do not charge electrostatically due to the special carbon and chemical additives. Additionally, the dust and fine powder does not stick on the surface.
To decide for which application which filament suits the best, can be determined mainly experimentally. It depends on the electrical and mechanical requirements of the objects, and the 3D printing parameters. Filaticum Antistatic has the best mechanical properties, similar to standard PLA Filaticum Conductive is the most rigid in this line, because of the used carbon powder and fiber, required for conductivity. Filaticum ESD is somewhere in the middle range.
Filaticum ESD provides surface resistance at megaohm order of magnitude, but this highly depends on the size and shape of the printed object. As a rule of thumb, if the printing temperature is higher, the surface resistivity is lower. The surface resistance also depends on the orientation, with a higher value in the Z direction and a lower value in the XY direction.
Usually any type of bed surface can be used, in case of capton, the traction is stronger.
-
DetailsFilaticum Electrical: Conductive
36 990 Ft – 123 290 Ft 29 126 Ft + VAT Add to cartFilaticum Electrical products are used mainly in the electronics and automotive industry where electrostatic charging of the printed object can damage the product. Objects printed with Filaticum CONDUCTIVE, ESD or ANTISTATIC do not charge electrostatically due to the special carbon and chemical additives. Additionally, the dust and fine powder does not stick on the surface.
To decide for which application which filament suits the best, can be determined mainly experimentally. It depends on the electrical and mechanical requirements of the objects, and the 3D printing parameters. Filaticum Antistatic has the best mechanical properties, similar to standard PLA. Filaticum Conductive is the most rigid in this line, because of the used carbon powder and fiber, required for conductivity. Filaticum ESD is somewhere in the middle range.
Filaticum Conductive provides surface resistance at megaohm order of magnitude, but this highly depends on the size and shape of the printed object. As a rule of thumb, if the printing temperature is higher, the surface resistivity is lower.
Usually, any type of bed surface can be used, direct drive is recommended.
-
DetailsFilaticum Essence
9 990 Ft – 33 290 Ft 7 866 Ft + VAT Add to cartFilaticum Essence – just like Filaticum Model and Gypsum – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. The mineral content of Filaticum Essence is minimal, it does not contain pigments, and this combination resulted in an easy-to-use filament. The surface of printed objects is homogeneous, layers are barely visible, and the usual surface roughness is blurred. Mechanical post-processing of objects (polishing, carving, etc.) and painting are easier than in case of standard PLA.
Video about how the Model filament (part of the product group) works in practice:
-
DetailsFilaticum Model
16 990 Ft – 56 590 Ft 13 378 Ft + VAT Add to cartFilaticum Model – just like Filaticum Gypsum and Essence – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. The mineral content in the Filaticum Model is medium, less brittle than Gypsum filament, as for its basic characteristics it is between Gypsum and Essence filaments. The printed objects are off-white, with a matte finish, and the details are well outlined, which is useful for modelers. The printed models can be painted much easily than those printed with standard PLA or ABS filaments. The object can be sanded – both dry and wet – , and it is easy to cut, thus most accurate models can be printed with Filaticum Model. It is one of the most versatile Filaticum products.
-
DetailsFilaticum Gypsum
16 990 Ft – 56 590 Ft 13 378 Ft + VAT Add to cartFilaticum Gypsum – just like Filaticum Model and Essence – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. Filaticum Gypsum has the highest mineral content, thus it is yellowish, looks like rock or gypsum. The printed objects can be shaped very easily: they can be cut with a sharp tool, sanded, and polished, thus facilitating the post-processing of the object. It is easy to paint also, even with water-based paint. Due to the high mineral content the suggested printing temperature is lower than in case of standard PLA: 185-210 0C. Direct drive is recommended.
Video about how the Model filament (part of the product group) works in practice: