Showing all 10 results
The PLA raw material of PLA Advanced was developed especially for manufacturing 3D printing filaments, which has to meet higher printing needs. The objects printed with this filament are stronger and more durable.
Filaticum PLA Advanced also has a higher heat resistance, up to 85 0C. With this value, it also competes against PETG and ABS filaments. This filament is less brittle, and with excellent layer adhesion we can achieve an exceptionally even surface and more precise printing. The surface of printed object can be shiny at elevated printing temperature and matt at lower temperature, but this depends on the printer also.
Thanks to special additives and pigments, Filaticumt PLA is characterized by easy printability and saturated colors. Even when you print in one layer, you will get the same color you see on the spool. Printable in a wide temperature and printing speed range. The Filaticum PLA can be used without heated bed, and even with an open 3D printer you will get good printing quality.
This filament is an improved version of our Filaticum PLA Advanced product, and it provides higher quality in terms of mechanical properties. Its PLA raw material is produced specially for 3D printing filaments, which we made even more unique with special additives; thus, it can be used as an alternative to PETG and ABS. What distinguishes from PLA Advanced is that objects printed from PRO filament are much more flexible and impact resistant.
Filaticum PLA Advanced PRO is a really user-friendly, easy-to-print filament. It adheres easily to the bed, its layer adhesion is also excellent, thus providing an even surface and more precise printing result. Higher printing temperature (225C0) is required to achieve better mechanical properties.
Filaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.
Filaticum PLA Budget filament, just like other Filaticum PLA products, provide excellent printing results. Their shrinkage is minimal, you can print them even on an unheated bed. They are available in black, white, blue, red and silver-gray colors, on 750-gram rolls at a reasonable price.
Two colors on one spool: A total of 1 kg of PLA filament in two colors (colors can’t be selected), approximately equally proportioned. One of the colors is usually black or white. It is easy to use the filament from the spool, the two colors are separated and paralell winded. Diameter: 1,75 mm.
PETG is an ideal choice for 3D printing when reduced warping and high heat resistance are important requirements. Objects printed with PETG are heat resistant up to 85° C, and they are also resistant to chemical influences (e.g. chemicals, solvents, biologically active agents). Printing with PETG is almost as simple as with PLA. PETG is odorless when printing.
The new generation ABS filament is designed for printing more durable, impact resistant, heat resistant objects. Thanks to the automotive-grade raw material and additives, the shrinkage of an object printed with Filaticum ABS is very low, while its impact resistance is extremely high. The surface of the printed object has a matt, silky effect.