PLA Design
Showing all 4 results
-
DetailsFilaticum PLA Litho
8 990 Ft – 22 390 Ft 7 079 Ft + VAT Add to cartPLA filament designed for printing lithophanes, for beginners and professionals.
The uniquely developed off-white colour gives a beautifully bright appearance on thin surfaces and a darker, contrasting appearance on thicker surfaces. Printed objects will look like real photographs. Thanks to the additive used to achieve the special optical effect, the printed layers are also less visible, they almost disappear.
-
DetailsFilaticum Wood
13 490 Ft – 44 890 Ft 10 622 Ft + VAT Add to cartFilaticum Wood filament is designed to create objects resembling real wood in texture and color. Printing settings are the same as those for standard PLA, and you should pay attention to the same things. The nozzle clogging is not an issue with Filaticum Wood, as it I usually a case with wood filaments.
At the same time, the adhesion is excellent, shrinkage is minimal.
The wood effect is also enhanced by the fact that the printed object has a unique touch that is rougher and more natural than PLA. In addition, it is relatively easy to sand and simple to paint.
-
DetailsFilaticum Fuzzy
9 990 Ft 7 866 Ft + VAT Add to cartFilaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.
-
DetailsFilaticum High Transparent
14 990 Ft – 49 890 Ft 11 803 Ft + VAT Add to cartTransparent PLA filaments have a slight yellowish color, in addition, if you print thicker objects, the transparency disappears. With Filaticum High Transparent you can get an almost water-clear finish. It is an easy-to-print filament, in a wide range of printing temperature. The transparency of the printed object can be improved by changing the printing parameters: a nozzle with larger diameter, and the lowest possible layer height. It’s important to know that the texture of the print can also affect the transparency, and the best results can be obtained by printing single-layer walls.