PLA Modeling
Showing all 3 results
-
DetailsFilaticum Essence
9 990 Ft – 33 290 Ft 7 866 Ft + VAT Add to cartFilaticum Essence – just like Filaticum Model and Gypsum – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. The mineral content of Filaticum Essence is minimal, it does not contain pigments, and this combination resulted in an easy-to-use filament. The surface of printed objects is homogeneous, layers are barely visible, and the usual surface roughness is blurred. Mechanical post-processing of objects (polishing, carving, etc.) and painting are easier than in case of standard PLA.
Video about how the Model filament (part of the product group) works in practice:
-
DetailsFilaticum Model
16 990 Ft – 56 590 Ft 13 378 Ft + VAT Add to cartFilaticum Model – just like Filaticum Gypsum and Essence – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. The mineral content in the Filaticum Model is medium, less brittle than Gypsum filament, as for its basic characteristics it is between Gypsum and Essence filaments. The printed objects are off-white, with a matte finish, and the details are well outlined, which is useful for modelers. The printed models can be painted much easily than those printed with standard PLA or ABS filaments. The object can be sanded – both dry and wet – , and it is easy to cut, thus most accurate models can be printed with Filaticum Model. It is one of the most versatile Filaticum products.
-
DetailsFilaticum Gypsum
16 990 Ft – 56 590 Ft 13 378 Ft + VAT Add to cartFilaticum Gypsum – just like Filaticum Model and Essence – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. Filaticum Gypsum has the highest mineral content, thus it is yellowish, looks like rock or gypsum. The printed objects can be shaped very easily: they can be cut with a sharp tool, sanded, and polished, thus facilitating the post-processing of the object. It is easy to paint also, even with water-based paint. Due to the high mineral content the suggested printing temperature is lower than in case of standard PLA: 185-210 0C. Direct drive is recommended.
Video about how the Model filament (part of the product group) works in practice: