Filaticum ABS
7 900 Ft
6 220 Ft + VATThe new generation ABS filament is designed for printing more durable, impact resistant, heat resistant objects. Thanks to the automotive-grade raw material and additives, the shrinkage of an object printed with Filaticum ABS is very low, while its impact resistance is extremely high. The surface of the printed object has a matt, silky effect.
1 kg Filaticum products are winded on a transparent plastic spool. Spools are sealed with shrink foil, and we deliver them in an environmentally friendly cardboard box which is also covered with shrink wrap.
- Filament weight: 1 kg
- Packaged weight: 1,45 kg
- Spool size: 204 mm x 67 mm
- Spool hub diameter: 52 mm
Our filaments are also available in 2.5 kg in the webshop:
- Filament weight: 2,5 kg
- Packaged weight: 3,3 kg
- Spool size: 300 mm x 100 mm
- Spool hub diameter: 52 mm
If you need larger spools (4,5 kg or 9 kg), please contact us!
The raw material of the filament is PETG.
Related products
-
DetailsFilaticum PLA Budget
5 700 Ft 4 094 Ft + VAT Add to cartFilaticum PLA Budget filament, just like other Filaticum PLA products, provide excellent printing results. Their shrinkage is minimal, you can print them even on an unheated bed. They are available in black, white, blue, red and silver-gray colors, on 750-gram rolls at a reasonable price.
-
DetailsFilaticum PETG
10 800 Ft – 27 000 Ft 8 504 Ft + VAT Add to cartPETG is an ideal choice for 3D printing when reduced warping and high heat resistance are important requirements. Objects printed with PETG are heat resistant up to 85° C, and they are also resistant to chemical influences (e.g. chemicals, solvents, biologically active agents). Printing with PETG is almost as simple as with PLA. PETG is odorless when printing.
- Print temperature: 245 – 250°C
- Print bed temperature: 80°C
-
DetailsFilaticum Fuzzy
9 500 Ft 7 480 Ft + VAT Add to cartFilaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.
-
DetailsFilaticum PLA Advanced PRO
11 800 Ft – 29 500 Ft 8 898 Ft + VAT Add to cartThis filament is an improved version of our Filaticum PLA Advanced product, and it provides higher quality in terms of mechanical properties. Its PLA raw material is produced specially for 3D printing filaments, which we made even more unique with special additives; thus, it can be used as an alternative to PETG and ABS. What distinguishes from PLA Advanced is that objects printed from PRO filament are much more flexible and impact resistant.
Filaticum PLA Advanced PRO is a really user-friendly, easy-to-print filament. It adheres easily to the bed, its layer adhesion is also excellent, thus providing an even surface and more precise printing result. Higher printing temperature (225C0) is required to achieve better mechanical properties.