Description
Benefit
- It has a natural, less plastic feel
- Easy post-processing – sanding, cutting, painting
- Objects with natural-touching surface
Applications
- Production of models
- Printing of film props
- Making wooden feel utensils and toys
Filaticum Wood
10 622 Ft + VATFilaticum Wood filament is designed to create objects resembling real wood in texture and color. Printing settings are the same as those for standard PLA, and you should pay attention to the same things. The nozzle clogging is not an issue with Filaticum Wood, as it I usually a case with wood filaments.
At the same time, the adhesion is excellent, shrinkage is minimal.
The wood effect is also enhanced by the fact that the printed object has a unique touch that is rougher and more natural than PLA. In addition, it is relatively easy to sand and simple to paint.
Recommended printing parameters
| Nozzle temp. [°C] | 205-215 |
| Bed temp. [°C] | 55-70 |
| Max. print speed [mm/s] | 120 |
| Nozzle diameter [mm] | 0,6-1 |
| Nozzle material |
brass, steel |
750-gram Filaticum products are winded on a transparent plastic spool. Spools are sealed with shrink foil, and we deliver them in an environmentally friendly cardboard box which is also covered with shrink wrap.
- Filament weight: 750 grams
- Packaged weight: 1,2 kg
- Spool size: 204 mm x 67 mm
- Spool hub diameter: 52 mm
Our filaments are also available in 2.5 kg in the webshop:
- Filament weight: 2,5 kg
- Packaged weight: 3,3 kg
- Spool size: 300 mm x 100 mm
- Spool hub diameter: 52 mm
If you need larger spools (4,5 kg or 9 kg), please contact us!
Filaticum PLA filaments are bio-composite products.
Why bio? The raw materials used are typically natural, derived from renewable resources. The PLA’s raw material is corn, and the additives used in some filaments – e.g. gypsum, carbon fiber, carbon powder – are also natural materials.
Why composite? The filaments contain additives, which make possible to produce filaments with different mechanical, physical and chemical properties, in line with the further application needs. These additives have a positive effect on printability also, and they modify the surface structure of the printed objects.
Thanks to composites, special filaments can be designed and manufactured for different applications. You can read more about composites in our blogpost.
Filaticum filaments can be used in all common 3D printers based on FDM/FFF technology.
Filaticum pigments
The used pigments result in saturated, bright, and friendly colors. The saturation is retained even on objects printed with thinner wall thicknesses. The pigments reach the best thermal stability value according to DIN 54001 and also achieve the best light resistance value according to DIN 53388.
Food safety compliance
Most of the raw materials and pigments used in the production of Filaticum products comply with the regulations in EU (EC Resolution 98(1) and Commission Regulation 10/2011/EC).
Raw material of Filaticum filaments is RoHS certified and REACH compliant.
Filaticum products do not contain or use any hazardous chemicals in the manufacturing process.
Biodegradability
Filaticum products are made from natural raw materials and are biodegradable under industrial composting conditions.
Related products
-
DetailsFilaticum Cleaning
1 890 Ft 157 Ft + VAT Add to cartFilaticum Cleaning was designed for cleaning the extruder and the nozzle. This special filament incorporates short glass fibers thus removes staining and polishes the inner surface. Recommendation of use: print about 20 cm filament which cleans the extruder. If the outflow material clean, it means that the extruder is also clean. In some cases a little bit more material is needed. The efficiency of the cleaning process could increase, if you stop the printing for a while and then continue it. Regular use of Filaticum Cleaning reduces the plugging, increase the shelf life of the extruder. It is also strongly recommended if you changes often the different colored filaments or swap different raw materials.
-
DetailsFilaticum Gypsum
16 990 Ft – 56 590 Ft 13 378 Ft + VAT Add to cartFilaticum Gypsum – just like Filaticum Model and Essence – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. Filaticum Gypsum has the highest mineral content, thus it is yellowish, looks like rock or gypsum. The printed objects can be shaped very easily: they can be cut with a sharp tool, sanded, and polished, thus facilitating the post-processing of the object. It is easy to paint also, even with water-based paint. Due to the high mineral content the suggested printing temperature is lower than in case of standard PLA: 185-210 0C. Direct drive is recommended.
Video about how the Model filament (part of the product group) works in practice:
-
DetailsFilaticum PLA High Impact
16 990 Ft – 56 590 Ft 13 378 Ft + VAT Add to cartThanks to its unique recipe, Filaticum PLA High Impact filament provides the printed object with high impact resistance, comparable or even higher than PETG provides. The flexibility of the filament is similar to that of polypropylene, but printing with it is as simple as with any PLA filament. The impact resistance of the filament depends largely on the printing parameters, it is preferable to print at higher temperatures – up to 225 0C.
-
DetailsFilaticum Fuzzy
9 990 Ft 7 866 Ft + VAT Add to cartFilaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.