Blue
Showing all 5 results
-
DetailsFilaticum Engineering
22 290 Ft – 74 290 Ft 16 535 Ft + VAT Add to cartThis PLA-based filament offers enhanced possibilities for industrial applications. The thermal stability of objects printed with Filaticum Engineering is extremely high, they could bear up to 120 °C heat, in most of the cases without any heat treatment after printing.
Filaticum Engineering is also much more resistant to other external impacts than standard PLA materials: it has a high tensile and compressive strength and extremely high stiffness, making it an excellent material for objects that are exposed to typical influences in industrial environments.
-
Sale!
DetailsFilaticum Fuzzy
8 000 Ft 7 480 Ft + VAT Add to cartFilaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.
-
DetailsFilaticum PETG
11 990 Ft – 29 890 Ft 8 504 Ft + VAT Add to cartPETG is an ideal choice for 3D printing when reduced warping and high heat resistance are important requirements. Objects printed with PETG are heat resistant up to 85° C, and they are also resistant to chemical influences (e.g. chemicals, solvents, biologically active agents). Printing with PETG is almost as simple as with PLA. PETG is odorless when printing.
-
DetailsFilaticum PLA Budget
6 390 Ft 3 583 Ft + VAT Add to cartFilaticum PLA Budget filament, just like other Filaticum PLA products, provide excellent printing results. Their shrinkage is minimal, you can print them even on an unheated bed. They are available in black, white, blue, red and silver-gray colors, on 750-gram rolls at a reasonable price.
-
DetailsFilaticum PLA
8 990 Ft – 22 390 Ft 6 614 Ft + VAT Add to cartThanks to special additives and pigments, Filaticumt PLA is characterized by easy printability and saturated colors. Even when you print in one layer, you will get the same color you see on the spool. Printable in a wide temperature and printing speed range. The Filaticum PLA can be used without heated bed, and even with an open 3D printer you will get good printing quality.