Green
Showing all 2 results
-
Sale!
DetailsFilaticum PLA
Thanks to special additives and pigments, Filaticumt PLA is characterized by easy printability and saturated colors. Even when you print in one layer, you will get the same color you see on the spool. Printable in a wide temperature and printing speed range. The Filaticum PLA can be used without heated bed, and even with an open 3D printer you will get good printing quality.
8 400 Ft – 21 000 Ft
5 880 Ft – 14 700 Ft 6 614 Ft + VAT Add to cart -
Sale!
DetailsFilaticum Fuzzy
Filaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.
9 500 Ft
6 650 Ft 7 480 Ft + VAT Add to cart
A Filaticum PLA filamentek bio-kompozit termékek.
Miért bio? A felhasznált alapanyagok jellemzően természetes alapú, megújuló erőforrásból előállított anyagok. A PLA alapanyaga kukorica, az egyes filamenteknél alkalmazott adalékok – pl. gipsz, szénszál, szénpor – szintén természetes anyagok.
Miért kompozit? A filamentek adalékanyagokat tartalmaznak, így lehet azt elérni, hogy a felhasználástól függően a 3D nyomtatószálak megfelelő mechanikai, fizikai, kémiai tulajdonságokkal rendelkezzenek. Ezen anyagok pozitívan befolyásolják a nyomtathatóságot, módosítják a kinyomtatott tárgyak felületi struktúráját.
A Filaticum nyomtatószálak az összes elterjedt FDM/FFF technológián alapuló 3D nyomtatóban használhatók.