Red
Showing all 5 results
-
AKCIÓ
DetailsFilaticum PLA
6 300 Ft – 22 390 Ft 7 079 Ft + VAT Add to cartThanks to special additives and pigments, Filaticumt PLA is characterized by easy printability and saturated colors. Even when you print in one layer, you will get the same color you see on the spool. Printable in a wide temperature and printing speed range. The Filaticum PLA can be used without heated bed, and even with an open 3D printer you will get good printing quality.
-
DetailsFilaticum PLA High Speed
9 990 Ft – 24 890 Ft 5 504 Ft + VAT Add to cartFilaticum High Speed filament has been developed for fast, at the same time accurate 3D printing. It produces high quality, precise prints with a printing speed of 300 mm/s. Depending on the object and the printing settings, up to 600 mm/s printing speed can be achieved with this filament. Because of the special additives, the filament has a lower viscosity, providing excellent material spread and adhesion between layers. Since the filament can be dispensed evenly at higher speeds, there is no clogging or under-extrusion during printing.
-
DetailsFilaticum PLA Budget
6 390 Ft 5 032 Ft + VAT Add to cartFilaticum PLA Budget filament, just like other Filaticum PLA products, provide excellent printing results. Their shrinkage is minimal, you can print them even on an unheated bed. They are available in black, white, blue, red and silver-gray colors, on 750-gram rolls at a reasonable price.
-
AKCIÓ
DetailsFilaticum PLA Advanced
8 250 Ft – 29 390 Ft 9 283 Ft + VAT Add to cartThe PLA raw material of PLA Advanced was developed especially for manufacturing 3D printing filaments, which has to meet higher printing needs. The objects printed with this filament are stronger and more durable.
Filaticum PLA Advanced also has a higher heat resistance, up to 85 0C. With this value, it also competes against PETG and ABS filaments. This filament is less brittle, and with excellent layer adhesion we can achieve an exceptionally even surface and more precise printing. The surface of printed object can be shiny at elevated printing temperature and matt at lower temperature, but this depends on the printer also.
-
DetailsFilaticum Fuzzy
9 990 Ft 7 866 Ft + VAT Add to cartFilaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.