Tough
Showing all 6 results
-
DetailsFilaticum Engineering
22 290 Ft – 74 290 Ft 12 283 Ft + VAT Add to cartThis PLA-based filament offers enhanced possibilities for industrial applications. The thermal stability of objects printed with Filaticum Engineering is extremely high, they could bear up to 120 °C heat, in most of the cases without any heat treatment after printing.
Filaticum Engineering is also much more resistant to other external impacts than standard PLA materials: it has a high tensile and compressive strength and extremely high stiffness, making it an excellent material for objects that are exposed to typical influences in industrial environments.
-
AKCIÓ
DetailsFilaticum PLA Advanced
8 250 Ft – 29 390 Ft 9 283 Ft + VAT Add to cartThe PLA raw material of PLA Advanced was developed especially for manufacturing 3D printing filaments, which has to meet higher printing needs. The objects printed with this filament are stronger and more durable.
Filaticum PLA Advanced also has a higher heat resistance, up to 85 0C. With this value, it also competes against PETG and ABS filaments. This filament is less brittle, and with excellent layer adhesion we can achieve an exceptionally even surface and more precise printing. The surface of printed object can be shiny at elevated printing temperature and matt at lower temperature, but this depends on the printer also.
-
DetailsFilaticum PETG Carbon
29 990 Ft 23 614 Ft + VAT Add to cartThis PET-G filament reinforced with carbon fibers enhances rigidity, hardness, and tensile strength while maintaining minimal shrinkage. As a result of carbon fiber content, the surface of printed objects is matte, and it gives an attractive appearance. While printing, it provides excellent adhesion to build platforms and good dimensional stability.
-
DetailsFilaticum PLA Advanced PRO
12 490 Ft – 31 290 Ft 9 835 Ft + VAT Add to cartThis filament is an improved version of our Filaticum PLA Advanced product, and it provides higher quality in terms of mechanical properties. Its PLA raw material is produced specially for 3D printing filaments, which we made even more unique with special additives; thus, it can be used as an alternative to PETG and ABS. What distinguishes from PLA Advanced is that objects printed from PRO filament are much more flexible and impact resistant.
Filaticum PLA Advanced PRO is a really user-friendly, easy-to-print filament. It adheres easily to the bed, its layer adhesion is also excellent, thus providing an even surface and more precise printing result. Higher printing temperature (225C0) is required to achieve better mechanical properties.
-
DetailsFilaticum Essence
9 990 Ft – 33 290 Ft 7 866 Ft + VAT Add to cartFilaticum Essence – just like Filaticum Model and Gypsum – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. The mineral content of Filaticum Essence is minimal, it does not contain pigments, and this combination resulted in an easy-to-use filament. The surface of printed objects is homogeneous, layers are barely visible, and the usual surface roughness is blurred. Mechanical post-processing of objects (polishing, carving, etc.) and painting are easier than in case of standard PLA.
Video about how the Model filament (part of the product group) works in practice:
-
DetailsFilaticum Glass Reinforced
18 990 Ft – 63 290 Ft 14 953 Ft + VAT Add to cartThe strength, hardness, and heat resistance of filament reinforced with glass fiber go far beyond the characteristics of the standard PLA. It can withstand heat of up to 100 0C. The biopolymer-based filament is also suitable for printing lightweight parts, even applicable for replacing metal parts. The printed surface is unique, glassy, so it is also a perfect choice for designers. The warping of objects printed with Filaticum Glass Reinforced is very low. Recommended printing parameters: 215 0C nozzle, 60 0C bed. If you are printing continuously in bigger quantities (above 1-2 kg), hard nozzles are recommended, in this case the printing parameters should be adjusted accordingly. Direct drive is recommended.