Yellow
Showing all 3 results
-
AKCIÓ
DetailsFilaticum PLA
6 300 Ft – 22 390 Ft 7 079 Ft + VAT Add to cartThanks to special additives and pigments, Filaticumt PLA is characterized by easy printability and saturated colors. Even when you print in one layer, you will get the same color you see on the spool. Printable in a wide temperature and printing speed range. The Filaticum PLA can be used without heated bed, and even with an open 3D printer you will get good printing quality.
-
DetailsFilaticum PLA High Speed
9 990 Ft – 24 890 Ft 5 504 Ft + VAT Add to cartFilaticum High Speed filament has been developed for fast, at the same time accurate 3D printing. It produces high quality, precise prints with a printing speed of 300 mm/s. Depending on the object and the printing settings, up to 600 mm/s printing speed can be achieved with this filament. Because of the special additives, the filament has a lower viscosity, providing excellent material spread and adhesion between layers. Since the filament can be dispensed evenly at higher speeds, there is no clogging or under-extrusion during printing.
-
DetailsFilaticum Fuzzy
9 990 Ft 7 866 Ft + VAT Add to cartFilaticum Fuzzy filament was developed to create unique objects with a special surface. The layers typical for FDM 3D printing are blurred, almost disappeared, as a fluffy, fuzzy surface is formed over them. This is combined with a matt effect.
Filaticum Fuzzy is PLA-based filament, therefore PLA printing settings can be used as a baseline, and then, the surface texture of the printed object can be modified by varying the printing temperature. Recommended bed temperature: 60 °C.
For an even more special look, with a lower flow a surface with “craters” can be achieved.
In addition to the unique surface, the impact resistance of the material is also very good, it is easy to sand, post-process and glue also. The Z-axis adhesion of the print is also better compared to standard PLA filament.
To achieve the characteristic surface, in addition to PLA this filament contains additives, making it somewhat stiffer than usual. Due to the nature of the filament, it is prone to stringing, but this can be easily removed after printing without traces.
The spools weigh 750 grams, but they contain the same amount of filament length as standard 1 kg PLA filaments, so the material requirement should be calculated accordingly.